Sunday, June 28, 2015

Louvered Hall Tree

Hello,
Thanks for stopping by to see what I have just post on my Discover Repurposing site.
  Today is Sunday and I work on a Louvered Hall Tree that has been in my thoughts for sometime, but it was timing as usual that takes over and I start finding parts that I like and getting  inspired to create.
So here's where I started...



 I had two pair so I took one pair and joined them together so they would be flat and square as possible.

So then I laid it on my work table and installed some crown molding to the top and then finished my coffee. 

Then I started the frame work for the top and the 2 legs I took from an old dinning room table. Using some nice oak scraps I made the frame and attached it to the Louvered doors using 3" star drive screws. 
This Frame is strong.
.............................................< ...>...........................................................

Then I added a decorative piece under the top and a small piece of inside corner round to give it some depth and... I call it ......Fu Fu

Then I gave it a quick dry brushing with a mixture of different blue colors I had hanging aroundThanks for checking this post out. I appreciate you leaving comments if you have time.